Basic Information
| Model | ZMD-26120L-06 | ZMD-26120L-12 | ZMD-26120L-20 | ZMD-26120L-30 |
| Processing size (length x width) | 12000mm×2600mm（Customizable） | |||
| X/Y axis movable range | 12300mm/2650mm（Customizable） | |||
| Cutting thickness | 0.2-25mm（Depends on material） | 0.2-35mm（Depends on material） | 0.2-40mm（Depends on material） | 0.2-50mm（Depends on material） |
| Minimum line width | ＜0.1mm | |||
| Positioning accuracy | ＋0.2mm | +0.05mm | +0.2mm | +0.2mm |
| Repeatability | ＋0.2mm/1000mm | ＋0.05mm/1000mm | ＋0.2mm/1000mm | ＋0.2mm/1000mm |
| Maximum empty line speed | 50m/min | |||
| Maximum acceleration | 1G | |||
| Machine tool dimensions | 14000×4000×1800mm（Customizable） | |||
| Maximum laser power | 6000W | 12000W | 20000W | 30000W |
| Power supply | AC 380V 50HZ 3Phase | |||
Cost Analysis
| Laser Power | Assisted gasConsumption | Using air compress or cutting stainless steel | Using oxygen, cutting stainless steel | Using nitrogen, cutting stainless steel | |
| 6000W | Power consumption | Laser | 18KW | 18KW | 18KW |
| Water chiller group | 8KW | 8KW | 8KW | ||
| Host machine | 8KW | 8KW | 8KW | ||
| Dust exhausting equipment | 3KW | 3KW | 3KW | ||
| Consumable part | $0.6/h | $0.6/h | $0.6/h | ||
| Gas consumption | 17KW | $1.4 | $34.8 | ||
| Total power (Take 80% cutting power) | 37KW | 37KW | 37KW | ||
| Average power | 29.6KW | 29.6KW | 29.6KW | ||
| Total operating cost | $7/h | $6/h | $40/h | ||
| Laser Power | Assisted gasConsumption | Using air compress or cutting stainless steel | Using oxygen, cutting stainless steel | Using nitrogen, cutting stainless steel | |
| 12000W | Power consumption | Laser | 36KW | 36KW | 36KW |
| Water chiller group | 12KW | 12KW | 12KW | ||
| Host machine | 10KW | 10KW | 10KW | ||
| Dust exhausting equipment | 3KW | 3KW | 3KW | ||
| Consumable part | $0.8/h | $0.7/h | $0.7/h | ||
| Gas consumption | 17KW | $1.4 | $41.2 | ||
| Total power (Take 80% cutting power) | 61KW | 61KW | 61KW | ||
| Average power | 48.8KW | 48.8KW | 48.8KW | ||
| Total operating cost | $10.2/h | $8.9/h | $49.2/h | ||
| Laser Power | Assisted gas consumption | Using air compress or cutting stainless steel | Using oxygen, cutting stainless steel | Using nitrogen, cutting stainless steel | |
| 20000W | Power consumption | Laser | 60KW | 60KW | 60KW |
| Water chiller group | 20KW | 20KW | 20KW | ||
| Host machine | 15KW | 15KW | 15KW | ||
| Dust exhausting equipment | 3KW | 3KW | 3KW | ||
| Consumable part | $0.9/h | $0.9/h | $0.9/h | ||
| Gas consumption | 17KW | $1.4 | $41.6 | ||
| Total power (Take 80% cutting power) | 37KW | 37KW | 37KW | ||
| Average power | 78.4KW | 78.4KW | 78.4KW | ||
| Total operating cost | $14.1/h | $13.1/h | $53.5/h | ||
| Laser Power | Assisted gas Consumption | Using air compress or cutting stainless steel | Using oxygen, cutting stainless steel | Using nitrogen, cutting stainless steel | |
| 30000W | Power consumption | Laser | 70KW | 70KW | 70KW |
| Water chiller group | 30KW | 30KW | 30KW | ||
| Host machine | 20KW | 20KW | 20KW | ||
| Dust exhausting equipment | 3KW | 3KW | 3KW | ||
| Consumable part | $1.1/h | $1.1/h | $1.1/h | ||
| Gas consumption | 17KW | $1.7 | $48.7 | ||
| Total power (Take 80% cutting power) | 37KW | 37KW | 37KW | ||
| Average power | 123KW | 123KW | 123KW | ||
| Total operating cost | $17.1/h | $19.4/h | $63.4/h | ||
Cutting Thickness
Cutting Sample Display
